Home > ALL PRODUCTS >

ALG DEFENSE AKT-EL ENHANCED - MODIFIED FOR SAIGA and VEPR
ALG AKT-EL AK47 ENHANCED TRIGGER FOR SAIGA VEPR


 
Alternative Views:
Price: $124.99

Stock Status:
IN STOCK AVAILABLE FOR PURCHASE

SKU#: ALG-AKT-EL-MODIFIED
Qty:

Description
 
The HAMMER has been modified for you. Fits ALL Saiga Shotguns and Rifles, and VEPR 12 (does not fit VEPR Rifles). Fits LYNX 12. We recommend you also purchase JTE-MAIN-SPRING. NOTE: On some Saiga and VEPR applications, the Sear needs minor modifications, instructions are provided.

All ALG AKT trigger variants area single stage trigger designed for the AK47 and AK74 platforms.

The standard model, the (ALG-AKT) features a traditional CURVED trigger bow with a shorter trigger pull than the stock trigger. The trigger is coated in a corrosion resistant Manganese Phosphate finish.

The ENHANCED MODEL with Lightning Bow (ALG-AKT-EL) has a smoother and shorter trigger pull and a crisper reset than the standard model. It is also machined from gun quality alloy steel and has a corrosion resistant Manganese Phosphate finish.

The ULTIMATE MODEL with Lightning Bow (ALG-AKT-UL) features a pull that is even lighter and has a much crisper break which is ideal for precision and target shooting.

The AKT-EL and AKT-UL both feature a unique trigger bow known as the Lightning Bow, which produces a very comfortable feel to the user over the factory OEM trigger, while enhancing trigger control.

THREE parts for 922r compliance.

NOTE: Disconnect Spring IS Included. MAIN-SPRING NOT Included. You will also need an "Axis Pin Retaining Plate" or "Shepards Crook" to hold the trigger group in place.

NOTE: In some gun models, minor adjustments will be necessary. The SEAR sometimes needs filing and your safety sometimes needs filing in order for this FCG to fit properly.

recommended accessories for this product
Axis Pin Retaining Plate for Saiga Rifles/AK 47 JTE Performance Power Hammer Spring/Main Spring for All Saiga & AK Variants Axis Pin Retaining Spring - Shepherds Crook
Price: $6.95
Price: $7.95
Price: $2.00
Saiga Rifle AK47 Vepr Axis Pin Retaining plate Trigger Conversion AK47 Saiga JTE Mainspring hammer spring tromix Saiga Shotgun Rifle AK47 Vepr Axis Pin Retaining Shepherd Spring Trigger Conversion

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 6 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Perfect August 3, 2023
Reviewer: Guy Peterson from Chattanooga TN United States  
Fits perfectly into my Saiga 223 I converted. I did have to use one of the roll pins to make the safety work properly. Super light and smooth trigger pull now. Perfect trigger for any AK style rifle.  Thanks

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Almost excellent. April 23, 2022
Reviewer: Justin Schupp from Carnegie, PA United States  
The only thing this is missing is a trigger stop so essentially the trigger can just pull nearly all the way to the end of the trigger guard at least it's that way with the vepr 12 and I'm sure it'll be the same with the AK-47. What you can do is sand down the disconnector flat on the right side and sand the factory trigger stop so it fits in between the new trigger.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Feels great! December 24, 2021
Reviewer: Corey S. from Virginia  
The install on the Saiga platform was mostly painless! The only work required was filing the bottom left corner of the safety to clear the disconnect so the safety would actually engage. Very much appreciated that the front tang was ground to fit! Install took less than an hour all said and done with function checks.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
4 of 5 Good but be prepared for fitting October 4, 2021
Reviewer: Tom from USA  
I placed this trigger group in a Lynx 12. 1. This trigger group does not use the factory tube bushing to hold the trigger, sear, and spring together for easy placement inside the receiver. I had to loosely set those pieces in the receiver and try to work the trigger pin through while pressing down on the sear. This was frustrating until I used this install tip. Push trigger pin in till it stops at the sear. Use hammer pin from the other side to align the trigger and bolt hold open/spring. Once lined up I could push down on the sear without it coming out of place. Once through the sear I could press the trigger pin through completely using the other pin as a guide.
2. The bolt carrier hit the top of the trigger hook if trigger was not held to rear during cycling.  This issue locked up the gun. I had to file the top right corner away from the (much thicker) trigger hook. Once rounded and smoothed out the shotgun cycles fine.


Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
5 of 5 September 25, 2021
Reviewer: Viper 308 from Lyons, NY United States  
Love these single stage triggers!!! I have them in 3- AK ‘s now and for the money you can’t beat um way cheaper than my AR triggers !!! Buy it and you won’t regret it!

Was this review helpful to you?

View All Customer Reviews