Home > FAQ > Miscellaneous

FAQ About Miscellaneous

Why does my bank statement show a transaction when my card was declined?

If your order was declined your bank will sometimes put a temporary hold on the money even though we have not had an approved sale. The pending charge will fall off in a few days depending on your bank. If you bank is holding funds, you must contact them to rectify the situation.

I was wondering what all I have to order to be able to install a bumpski on a non-converted Saiga 12.

It can work if you have our external adapter block and the universal bar Bumpski. Remember 922 R compliance at that point in time though. Just a stock installation will not meet the standard for compliance. (Also, this install makes for a longer trigger pull.)

I bought a CSS rail for the rear sight of my Saiga Shotgun and I'm confused on how to install it.

Using a punch, remove the rear sight using a hammer. Pond it carefully on one side and it should slide out of the dovetail holder welded on the top of the gas tube holder. It will be very tight as it was originally installed using a press. If it won’t come out using a punch, then make a relief cut across the top of the sight (from side to side - do not cut the dovetail holder) with a dremel tool or hack saw. Once you have made a relief cut on the sight, you can probably get it out with a punch or screwdriver. Just try to keep your mounted dovetail in good shape. The rail mount dove tail will then slide in (using a punch). It will be a very tight fit. Then tighten down the screws and attach the top.

HANDGUARDS

Here is a break down on what is needed for the AK hand guards.

Any Saiga Rifle or Vepr Rifle Version 1 will need to install 2 parts in order to install any AK47 stlye Handguard. (Note: Version 2 Vepr Rifles do not have a removable gas tube and will not work).

AK47 gastube

Handguard Retailing Bracket (CSS or DPH)

-Allows you to attach all AK 47 style upper hand guards to your AK47's, Vepr and Saiga Rifles.

They will need a bolt on Lower retaining bracket to match their barrel size to hold the lower hand guard section in place. (CSS brackets below)

HANDGUARD RETAINING LOWER BRACKET SAIGA 223, 5.45, 7.62 RIFLE: $39.95

-Retaining Bracket allows you to install AK Hand Guards on Vepr & Saiga 5.45, 223, 7.62X39 Rifles and AK47's

HANDGUARD RETAINING LOWER BRACKET SAIGA 308 AND VEPR RIFLES: $39.95

-They can also use the DPH in place of either lower bracket above if they want steel.

HANDGUARD RETAINING LOWER BRACKET FOR ALL SAIGA AND VEPR RIFLES: $59.95

-Retaining Bracket allows you to install AK47 Hand Guards on Saiga and VEPR Rifles.

*None of the parts listed above will work on any Saiga or Vepr shotgun. They are only for the Rifles. Hope this helps.

**The Chaos quad on the list is the only one that does not need a lower retainer or gas tube to attach to the Saiga. It also will not fit the Vepr.