Home > SAIGA RIFLE PARTS >

AK-47/74 AKM RUSSIAN RED LAMINATE WOOD STOCKSET

AK47 RUSSIAN RED WOOD STOCK SET


 
Price: $189.95

Stock Status:
OUT OF STOCK


SKU#: CSS-AK47-WOOD-STOCKSET
Qty:

Description
 

AK47 Russian Red Style Stock Set Features

New US MADE Laminate wood Stock set for your AK Rifle. The stock set is complete including the wood pistol grip. Finished in Russian Red Color to give the stock set a incredibly clean and vibrant look. Polish style swelled hand guard, Pistol Grip slightly larger then stock AK Pistol Grips for a strong positive hold, and a specially contoured Mid Length 10" buttstock gives shooters a more ergonomic AK Stock set while maintaining that traditional Classic look!

The Classic Russian Red Butt stock Length is 10 inches giving you a perfect middle ground Between NATO and Warsaw Length stocks.

1. Stock Set features: Top and Bottom Hand guard, Pistol grip and Buttstock. US Made and will provide 3 US 922R Compliance parts and provides Jobs right here in the United States.

2. Stock set is for Stamped Receiver rifles only will not fit on Milled or other Special style guns IE Paps, Mac 90 etc.

3. Each stock set is hand built and finished in the US and carefully wrapped and packaged , we are not responsible for damage caused by customer installations and there are no returns if you damage the set.

4. Due to a wide variety manufacturing specifications on AK rifles Minor fitting may be required.

5. If you are unsure if the stock will fit your gun please email us photos of your gun and let us know the model you have.

Please Note : You will need to pre drill small pilot holes in the stock set before installing screws. Failure to do so may result in the laminate splitting and this would not be covered under warranty. Any returns must be in original unmodified condition as shipped to you with all original packaging. Wood is a natural product, depth of color, darkness of color and wood grain may vary from set to set. There may be minor cosmetic imperfections to wood surface. Does not include stock set screws or pistol grip hardware. Due to the nature of the AK47 firearms some fitting may be necessary.


This works on all stamped AK47's.

ATTENTION VEPR RIFLE OWNERS - major fitting is required to get lower handguard on your RPK barrel. Also, buttstock often requires adapters and fitting.

To install this 2 piece handguard on any Saiga or Vepr Rifle you will also need the "Handguard Retaining Lower Bracket" and a standard "AK47 Gastube" available separately.


recommended accessories for this product
HANDGUARD AK47 UPPER TENSION SPRING AK/AKM GAS TUBE FOR AK47/74/AKM, SAIGA and VEPR RIFLES "STANDARD" - NEW Made in USA 2-Pack Stock Screw for Wooden AK47 Stocks HANDGUARD AK47 LOWER TENSION SPRING
Price: $5.95
Price: $39.95
Price: $3.99
Price: $5.95
AK HAND GUARD RETAINING TENSION SPRING Upper Saiga Vepr AK47 Saiga Vepr gas tube handguard upper gastube Buttstock Screw for Wooden AK47 Stocks AK HAND GUARD RETAINING TENSION SPRING Lower Saiga Vepr
GRIP SCREW AK47 AK74 AKM, VEPR & SAIGA Rifles HANDGUARD RETAINING BRACKET SAIGA 308 AND VEPR RIFLES - ALUMINUM HANDGUARD RETAINING BRACKET AK/AKM and SAIGA 223, 5.45, 7.62 RIFLES - ALUMINUM (2 Piece bracket installs without removing sightblock and gasblock)
Price: $5.25
Price: $54.95
Price: $49.95
AK47 AK74 Saiga Vepr Tapco Grip Screw Saiga 308 Vepr Rifle AK47 Lower Handguard Retaining Bracket AK47 Saiga Rifle Hand Guard Retainer Bracket

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 6 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Nice October 9, 2023
Reviewer: Robby from Jacksonville, AR United States  
These people were great to deal with. Fast shippinf & tracking. Thanks

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Beautiful! November 29, 2022
Reviewer: Eric H from Granger, IN United States  
I am surprised at the quality of this product, the finish is excellent! It took some fitting with a small grinder in a few spots as was described but no big problems. A bit of tweaking and it fits my Saiga rifle perfectly. I would recommend this product to anyone who dislikes the tactical look and wants a classic AK design as I did. Very pleased!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
3 of 5 September 19, 2022
Reviewer: Joe White from Flippin, AR United States  
Waiting to be shipped due to hand guard

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Same March 20, 2022
Reviewer: Bumper from COLORADO SPRINGS, CO United States  
As good as the on line pictures, very happy with results

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Awesome February 2, 2022
Reviewer: Paul Dinardi from Roseburg, OR United States  
Used this setup to replace on an Arsenal 107R Plum setup. The front lower hand guard needed a little fitting for the factory block on the Arsenal version, but was able to re-use the factory retainer and all other pieces were perfect replacements. Wish I could post photos....

Was this review helpful to you?

View All Customer Reviews