Home > AK47, AK74 & AKM Parts >

Mag Catch Hardware - Screw Type Rivet (much easier to install)
AK47 Mag Catch Hardware
 
Price: $9.95

Stock Status:
IN STOCK AVAILABLE FOR PURCHASE

SKU#: RAM-MAG-CATCH-HARDWARE
Qty:

Description
 
Mag Catch Hardware Kit for AK47, Saiga Rifle, VEPR Rifle.

Works with most AK47 Mag Catch products, including your factory Mag catch.

Spring sold separately.

Instructions:
1. Insert the Mag catch and catch spring into place and bend the spring into tension. Use the dowel pin to hold the spring in place as it is being compressed.
2. Line up the Mag catch so the holes are properly aligned with the holes in the tower and the catch spring is under full tension.
3. Insert the rivet through the catch tower and through the holes in the catch while pushing the dowel pin out the other side.
4. Once the rivet is completely installed, you can secure it in place. Install the lock washer and screw (thread locker recommended).

Contents:
1 Threaded Rivet
1 Lock Washer
1 Dowel Pin

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 16 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 March 13, 2025
Reviewer: Geoff Meirose from Newport News , VA United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Mag catch hardware March 6, 2025
Reviewer: Abraham Vargas from Indianapolis, IN United States  
I have 5 aks that the mag catch was very small. Ended up replacing them with a larger mag catch. Did not have tools to put the cross axis pin and flare out the ends. I saw this on a YouTube video of a cross axis pin that uses a screw. All my aks have this and it has worked very well. Haven't had any issues with it. I would recommend this to anyone. They're reusable too just take the screw out and push out the cross axis pin.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Mag Catch Hardware - Screw Type Rivet February 25, 2025
Reviewer: WKU from Florida, United States  
Best means to replace standard AK magazine catch.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Genius April 16, 2024
Reviewer: Travis S. from ID United States  
This is the only pin you can trust 100%. Brilliant design.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 March 12, 2024
Reviewer: Anonymous Person from Altoona, PA United States  
Excellent substitute for the rivet. Literally installed the parts in seconds.

Was this review helpful to you?

View All Customer Reviews