Return to RAM 12XC EXTENDED MAGAZINE RELEASE SAIGA 12 & VEPR 12

Sort By:: Most Helpful Newest Rating: High to Low Rating: Low to High	Page of 1

0 of 0 people found the following review helpful:

Mag release lever - Item 4 of order. January 28, 2024 Reviewer: Steve from Hartford, WI United States   Communication and delivery from CSS is real good. Correct part, as shown. Was this review helpful to you?

0 of 0 people found the following review helpful:

Fits on KS-12. Quick, easy magazine release. February 18, 2023 Reviewer: TomJ from GU   Fits perfect on my KS12T. If your only using the factory box magazines, then you wont have to file the catch tongue that locks with rear tab of magazine. I have a 20rd promag and had to file down about 1/16 to accommodate the drum tab. Other than that it works perfectly and locks all my magazine in place to cycle the rounds. I have very light wiggle on the box magazine, but had no issues at the range. Down side: installation a little trick with the installation pin. Seems like the installation pin is just slightly smaller diameter than the Ks12 pin, so it easily falls out of place. So I found out, installing with the gun upright allowed pin to remain in place, then I used a punch to push out install pin and used the punch to guide the original mag release pin back in place. Then pat your back, you completed the install. Was this review helpful to you?

0 of 0 people found the following review helpful:

Ergonomic October 7, 2022 Reviewer: Anonymous Person   Does what it's supposed to - lets me drop the mag without adjusting my grip. Filing it to shape was pretty easy with a dremel, but reinstalling it was pretty miserable(compressing the spring, not losing the pin, etc). Was this review helpful to you?

0 of 0 people found the following review helpful:

VEPR 12 Ambidextrous magazine release April 23, 2022 Reviewer: L. J. G. from Grants Pass , OR United States   It shipped out almost immediately and it was here within 3 days. I was amazed to see it shipped out so fast. Great job at Carolina Shooters supply Was this review helpful to you?

0 of 0 people found the following review helpful:

RAM 12XC on Kalashnikov Komrad April 19, 2022 Reviewer: Chuck Clingerman from El Paso, TX United States   The RAM 12XC magazine release aligns and works perfectly with the Komrad shotgun. You may need to take a very small amount of material off the macazine latch side of the 12XC for fitment. The easiest way to check is to place the old and new mag releases side by side on a rod through the pivot point and compare them. A couple minutes of grinding with a dremel tool or a file is all that is required. Was this review helpful to you?

1 of 1 people found the following review helpful:

Quick release March 30, 2021 Reviewer: Kenneth Knight from Goose Creek, SC United States   Priced a little high. You'll definitely have to modify this to get it to work in a catamount. It is functional and easy to use. Was this review helpful to you?