Home > AK47, AK74 & AKM Parts > AK Furniture > AK Stocks >

Ace Doublestar AK Skeleton Stock
BUY ACE DOUBLESTAR SKELETON STOCK


 
Alternative Views:
Price: $89.95

Stock Status:
IN STOCK AVAILABLE FOR PURCHASE
SKU#: ACE-STOCK



STOCK LENGTH*:

Qty:  
Description
 
ACE Skeleton Stock for all Saiga's and AK47's. End cap and butt are machined from solid aluminum billet, oxide blasted and hard anodized. Top bar and center brace are turned from the super strong engineered polymer Delrin. Includes .5" curved, rubber recoil pad. This ACE stock comes in 3 lengths, 7.5", 8.5", and 9.5". Includes 1/2" recoil pad.

Weights
7.5" 11 OZ
8.5" 12 OZ
9.5" 13 OZ

Bolts on to all Receiver Blocks and the Tromix weld on back plate.
A Folding Mechanism can be added to easily fold your stock to one side.

recommended accessories for this product
RECOIL PAD 1/2" FOR ACE STYLE BOLT ON STOCKS RECOIL PAD 1" FOR ACE STYLE BOLT ON STOCKS CHEEK REST FOR ACE SKELTON STOCKS EXTERNAL RECEIVER BLOCK STOCK EXTENSION
Price: $19.00
Price: $19.00
Price: $14.95
Price: $49.95
ACE RECOIL PAD 1" SKELETON STOCK ACE RECOIL PAD 1" SKELETON STOCK Ace Saiga AK47 Cheek Rest Skeleton DPH Ace Saiga External Block Stock Extension
FOLDING MECHANISM "STANDARD-MANUAL" FOR SAIGA -AK47 STOCKS (WITH BOSS) INTERNAL RECEIVER BLOCK- STOCK ADAPTER FOR SAIGA'S & AK47'S FOLDING MECHANISM "PUSH BUTTON" FOR SAIGA -AK47 STOCKS
Price: $59.95
Price: $49.95
Price: $79.95
ACE FOLDING MECHANISM DPH Improved Galil stock Ak Saiga Saiga AK47 Internal Stock Adapter ACE DPH SAIGA FOLDING MECHANISM AK47 PUSH Button ACE

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 12 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 May 17, 2023
Reviewer: MICHAEL MURPHY from Richardson, TX United States  
Perfect fit after installing a AKRBMC Receiver Block on my milled Bulgarian AK. I did source mounting screws 1/4" longer than what came with the stock. The originals looked a bit short to my eye.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Ace stock April 11, 2023
Reviewer: Russell S. from Wedgefield, SC United States  
Ace stock was easy install. Kudos CSS.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 9mm SBR February 7, 2023
Reviewer: Jerry Warren from Woodland , WA United States  
This is the 2nd ace doublestar stock I have bought. The first for an AR9 build that turned out so well I bought one for my NAK-9 project.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Need longer screws to run with the adaptor September 20, 2022
Reviewer: Tom Hong from CA United States  
Nice finish. Gives a factory look on VEPR 12  since it's similar to factory VEPR12 stock sans the cheek riser. Came with 2 sets of screws for the butt pads and adaptor. The two M5 screws that came with the stock was about 5mm shorter than needed to screw into the folding push button. Had to stop by Home Depot to pick up 2 said screws in order to put them together. Tight fit. Seems it will hold up to 12 gauge but only time will tell.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great Service and Product September 6, 2022
Reviewer: Bryan Kory from Boerne, TX United States  
Everything came quickly and the product was just as described.

Was this review helpful to you?

View All Customer Reviews