Home > ALL PRODUCTS >

THREADING TOOL - 7.62x39/308 PILOT for ANNULAR CUTTER

Saiga Vepr AK47 7.62x39 308 5/8 x 24 Inch Annular Pilot Cutter Kit #25547


 
Price: $13.99

Stock Status:
IN STOCK AVAILABLE FOR PURCHASE

SKU#: CNCW-ANNULAR-PILOT-7.62
Qty:

Description
 
This precision turned pilot is made of heat treated 4140 (chrome moly) and finished in black oxide.
It is designed to guide your Annular cutter into the right location to keep the barrel diameter concentric with the rifled barrel hole.


The cutter should be ran at slow RPMs (around 200), lubricated constantly, and a pilot used to keep it centered on the barrel properly.

ANNULAR Cutter(Shown in picture) is sold separately below.

Carolina Shooters Supply Inc. expressly denies any liability for results that may occur from the proper, or improper, use of this tool. If you are unsure about using it, please do not order.



recommended accessories for this product
THREADING DIE STOCK HANDLE FOR 1 1/2" DIE THREADING DIE-14X1LH AK47, SAIGA 7.62, 5.45, 223 THREAD CUTTING OIL
Price: $20.95
Price: $37.95
Price: $5.95
DIE STOCK HANDLE SAIGA BARREL THREADING AK47 AR15 VEPR SAIGA AK47 7.62 THREADING DIES AND ALIGNMENT TOOL SAIGA AK47 VEPR AR15 THREAD CUTTING OIL TAP MAGIC

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 26 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 May 25, 2023
Reviewer: Ian Bloedel from Portland, OR United States  
As advertised. Looks like the annular cutter I purchased a month or two ago is only good for one project though.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 May 16, 2023
Reviewer: Christopher Lopez from Georgetown, DE United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 May 9, 2023
Reviewer: Carl Polk Jr. from Hana, HI United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Great Threading Tool Kit February 15, 2023
Reviewer: Anonymous Person from Madison, AL United States  
The Threading Tool performed as advertised.  After resizing the OD (Outside Diameter) of the Barrel with the Annular Cutter, I used the Threading Tool Kit to Thread the OD of the Muzzle for a Muzzle Break.  It worked great.  This Threading Kit comes with a Die and a Guide. You have to thread one end of the Guide into the Die.  The Die you provide has a small adjustment screw which allows the easy installation of this Guide into the Die.  As a result, the threading of the OD of the Barrel was easy.  Thanks for a great product and a well thought out Threading Tool Kit.  You might want to consider adding (perhaps as an option) a 90 degree Facing Die with Guide or even a Crowning Bit with Guide to this Kit for when a Barrel has to be cut off before threading for the Muzzle Break.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 February 13, 2023
Reviewer: Eric from ND United States  
Works great

Was this review helpful to you?

View All Customer Reviews