Home > BARREL THREADING TOOLS / DRILL BITS >

762 308 30CAL 5/8 x 24 RH THREADING KIT-1 (4 PART TOOL KIT)

SAIGA AK47 308 . THREADING DIES AND ALIGNMENT TOOL


 
Price: $59.99

Stock Status:
IN STOCK AVAILABLE FOR PURCHASE

SKU#: CSS-762-THREADINGKIT3
Qty:



The following items are included FREE with this product:

Description
 
This Kit comes combined with the tools needed to thread the barrel on your .308 rifle in 5/8 x 24 RH threads.


Kit includes:
1 - Thread Alignment Tool
1 - Threading Oil
1 - 1.5" Die Handle
1 - 5/8 x 24 RH Threading Die.


This Kit EXCLUDES the parts needed to cut your sight block
: Annular Pilot and Annular Cutter (These parts sold by CSS separately.)

Works for O.D. barrels 0.625" to 0.645".
Die Diameter is 1.5".
Needs 1.5" die handle.
Sight block must be cut back first on Saiga rifles.

Dies do not have any warranty.
If you over tighten the die holder you can crack the die.
If you do not use oil you can break cutting teeth from the die.



Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 6 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 The Threading Tool performed as advertised. After February 15, 2023
Reviewer: Anonymous Person from Madison, AL United States  
The Threading Tool performed as advertised.  After resizing the OD (Outside Diameter) of the Barrel with the Annular Cutter, I used the Threading Tool Kit to Thread the OD of the Muzzle for a Muzzle Break.  It worked great.  This Threading Kit comes with a Die and a Guide. You have to thread one end of the Guide into the Die.  The Die you provide has a small adjustment screw which allows the easy installation of this Guide into the Die.  As a result, the threading of the OD of the Barrel was easy.  Thanks for a great product and a well thought out Threading Tool Kit. You might want to consider adding (perhaps as an option) a 90 degree Facing Die with Guide or even a Crowning Bit with Guide to this Kit for when a Barrel has to be cut off before threading for the Muzzle Break.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Threading Kit February 13, 2023
Reviewer: Tom Wasinger from Garden Plain, KS United States  
All good, quick process, and delivery thank you!  I think (and I know) now I probably order the wrong one in the first place …

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Excellent Service February 7, 2023
Reviewer: Stuart Taylor from Trussville, AL United States  
Excellent Service

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Very satisfied December 30, 2022
Reviewer: Rod Usrey from Mohave Valley, AZ United States  
They answered my questions, shipped it quickly, & the items we high quality and worked well… no complaints at all.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 Barrel threading December 14, 2022
Reviewer: Gil Foreman from Hattiesburg, MS United States  
Tired of going to the gun smith, wait, go pick up gun etc... never mind the money.  I bought these and man, with a decent drill press, proper setup,  and some basic tool knowledge this set performed great. My first attempt looks like a seasoned machinist did it. My friend that turned me on to this kit uses a 20v dewalt drill and has zero issues.

Was this review helpful to you?

View All Customer Reviews