The CSS Gas Plug Regulator was designed to improve the cycling of all Saiga 12 gauge Shotguns regardless of the barrel length.
- The 6 gas settings allow you to tune your firearm correctly to the shell that you are shooting for optimum performance.
- The CSS Gas Plug Regulator is simple to install - Simply unscrew the factory plug and replace it with your new CSS Gas Plug.
- This gas plug utilizes 6 different gas settings instead of the factory 2.
- With the wide range of 12 ga loads available today, the additional settings will allow you to better tune your shotgun's gas system to the type of ammo that you are using.
Tired of your Saiga being picky with ammunition? At Carolina Shooters Supply, we have the solution with our Performance Gas Plug Regulator. This is one of the most essential Saiga parts you can install, allowing you to easily adjust the gas system to perfectly match your load. By doing this, you ensure your shotgun reliably cycles everything from light birdshot to heavy buckshot and slugs, all while reducing felt recoil and wear on your firearm.
As the top online gun parts store for custom builds, we specialize in innovative Saiga accessories that deliver real-world results. This gas plug is one of the most popular shotgun parts we sell because it solves a critical issue for shooters. Stop dealing with frustrating cycling problems and unlock your Saiga's true performance. Order today.
Threads are M22x1 RH
SETTING GUIDE
The lower the number, the less gas it allows into the system.
Setting #1: is normally used for all 3 inch shells and some heavy 2 3/4 inch.
Setting #2,#3: are normally used for all heavy 2 3/4 inch buck shot slugs.
Setting #4,#5: are normally used for 2 3/4 inch high brass bird shot hunting loads.
Setting #6: allows the most gas into the system and is normally used for the low brass shells.
These settings may vary depending on the ammo and the firearms.
