Home > AK47, AK74 & AKM Parts >

AK74 AK103 Style Gas Block - Has 90 Degree Gas Port

AK74 AK103 GAS BLOCK 90 Degree Gas Port


 
Alternative Views:


Price: $29.95

Stock Status:
IN STOCK AVAILABLE FOR PURCHASE

SKU#: CSS-AK47-GASBLOCK-90
Qty:

Description
 
AK74 AK103 Gas Block.
Has 90 Degree Gas Port, can be used with predrilled barrels.
Diameter 0.591" or 15mm

recommended accessories for this product
AK47 AKM AK74 3mm RETAINER PINS (Gas Block and Front Sightblock Pins AK47 AKM AK74 PIN SET (4mm and 3mm Retainer Pins for AK Builders)
Price: $5.95
Price: $9.95
AK47 AKM 4mm 3mm Retainer Pin Set Gasblock Front Sightblock AK47 AKM 4mm 3mm Retainer Pin Set

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 10 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Great Match!!!! August 4, 2022
Reviewer: Carl T. Gaskill Jr. from Washington, PA United States  
Excellent copy of Bulgarian/Russian!!!! Love the quality!!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Ak74/AK103 Gas Block 90 Degree January 25, 2022
Reviewer: Allen from Detroit, MI United States  
A great product from an amazing online retailer. Fast shipping and as noted reached me within 3 business days. The quality of the part is superb and for the competitive price that Carolina Shooter Supply offers it was an easy purchase for me. Thank you again and thank you for providing a wide selection of parts!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
2 of 5 Got it for a tantal inspired build, ended badly December 30, 2021
Reviewer: Anonymous Person from KINGSBURG, CA United States  
Internal ID not entirely finished, only one round through, still very cast finished on the inside. Was a horrible mistake to attempt to install onto an AKM profile barrel, and a horrible time taking it off. Internal fractures on the rear end of the gas block

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Looks great on my WASR3 December 21, 2021
Reviewer: Andrew Sayers from glendale, AZ United States  
the price was awesome. spent 45 mins sanding the bayo lug for it to fit a Russian bayonet. I thought the job would be simple  to unpin front sight and old gas block and swap out the new one but this 90°one was extremely tight and ever so slightly bent my barrel when trying to press it on. So I hat to take it of and sand the inside and that didn't work so I completely removed barrel and all barrel parts. Here's what I did
-put my barrel on the lathe to shave off an extra 1/4 inch because 90° blocks sit farther back. Weld old gas hole on barrel and redrill a new one farther back.
Bent the barrel back to strait as much as humanly possible basically undetectable. Reassembled everything. And reblued all my parts. Looks fricken awesome. It was alot of work but if you have the right tools. Not sure if the wasr3 barrel was slightly different than the specs of this gas block. Upside to this project was A PRETTY GAS BLOCK and NEW SMALLER GAS HOLE DRILLED FOR MORE GENTLE EJECTION

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
2 of 5 Barrel bore undersized/gas tube fit September 28, 2021
Reviewer: Anonymous Person from United States  
I had a few issues…
1: The description says the barrel bore is .591”. It wasn’t. I have calibrated inspection equipment and it measured at .5895”. The barrel typically measures just over .593”. This would make an interference fit of .0035. That’s way too much. I ended up boring it out to the appropriate fit and it worked fine.
2: the diameter which fits inside the gas tube was only partially machined. Meaning half of it still had the casting texture on it. This made the fit with the gas tube very poor as it is super loose.

All in all it is on the rifle and should work, but only after half a day of modifications…

Was this review helpful to you?

View All Customer Reviews