Home > AK47, AK74 & AKM Parts >

ANNULAR CUTTER KIT - 9/16" BARREL THREADING (Optional Shank)

9/16" Annular Cutter Kit
 
Price: $76.95

Stock Status:
IN STOCK AVAILABLE FOR PURCHASE


SKU#: ANNULAR-CUTTER-KIT-9-16


OPTIONAL Drill Shank:


Qty:  
Description
 
This tool can be used to reduce a barrel OD (outside diameter) within close proximity to the size needed for 9/16" threads (approximately 0.57"). The barrel OD can start out no larger than .875 for this to work properly.
This tool provides you with one of the most economical and practical means available for reducing the barrel OD.
Easily removes the barrel shrouds covering the Saiga rifle and reduces barrel size to be threaded.
Bit OD: 0.875"
Bit ID: 0.5695"

The cutter should be ran at slow RPMs (around 200), lubricated constantly, and a pilot used to keep it centered on the barrel properly.

Barrel pilot (Shown in picture) is sold separately below. Please select the correct caliber pilot.

Carolina Shooters Supply Inc. expressly denies any liability for results that may occur from the proper, or improper, use of this tool. If you are unsure about using it, please do not order.
All Sales are final on all cutting tools.




recommended accessories for this product
THREADING TOOL - 5.45x39 PILOT for ANNULAR CUTTER THREADING DIE-14X1LH AK47, SAIGA 7.62, 5.45, 223 THREADING TOOL - 7.62x39/308 PILOT for ANNULAR CUTTER THREADING TOOL - 223 PILOT for ANNULAR CUTTER
Price: $13.99
Price: $37.95
Price: $13.99
Price: $13.99
Saiga Vepr AK47 5.45x39mm Pilot Kit #25547 SAIGA AK47 7.62 THREADING DIES AND ALIGNMENT TOOL Saiga Vepr AK47 7.62x39 308 5/8 x 24 Inch Annular Pilot Cutter Kit #25547 Saiga Vepr AK47 223 1/2 x 28 Inch Annular Pilot Cutter Kit #25567
THREAD CUTTING OIL THREADING DIE STOCK HANDLE FOR 1 1/2" DIE
Price: $5.95
Price: $20.95
SAIGA AK47 VEPR AR15 THREAD CUTTING OIL TAP MAGIC DIE STOCK HANDLE SAIGA BARREL THREADING AK47 AR15 VEPR