ANNULAR CUTTER KIT - 1/2 x 28 RH BARREL THREADING (Optional Shank) DONT FORGET YOUR PILOT !!! Sold Separately
$
Choose your options:
OPTIONAL Drill Shank:
SKU#: ANNULAR-CUTTER-KIT-12128
Stock Status: IN STOCK AVAILABLE FOR PURCHASE
This tool can be used to reduce a barrel OD (outside diameter) within close proximity to the size needed for 1/2 x 28 threads (approximately 0.5"). The barrel OD can start out no larger than .875 for this to work properly. This tool provides you with one of the most economical and practical means available for reducing the barrel OD. Easily removes the barrel shrouds covering the Saiga rifle and reduces barrel size to be threaded. Bit OD: 0.875" Bit ID: 0.515"
The cutter should be ran at slow RPMs (around 200), lubricated constantly, and a pilot used to keep it centered on the barrel properly.
Barrel pilot (Shown in picture) is sold separately below. Please select the correct caliber pilot. Carolina Shooters Supply Inc. expressly denies any liability for results that may occur from the proper, or improper, use of this tool. If you are unsure about using it, please do not order. All Sales are final on all cutting tools.
