(AKRBB) Ace AK Milled Internal Receiver Block
This is a drop in part with no milling required to this part to fit into the receiver.
AK milled internal receiver block for milled receiver for all common milled receivers, (Including Bulgarian, Arsenal and Chinese). Note: modification of receiver necessary, ONLY LOWER TANG needs to be removed. Simply cut the receiver Lower Tang flush and bolt this into the Upper Tang top and with a bolt through the center.
Side holes are drilled and tapped for an easy install of sling.
Allows you to mount all Carolina Raptor, Ace, DPH, Red Jacket and Tromix Stocks with or without Folding Mechanisms.
Made of solid billet aluminum.
Designed with a 3 degree corrected stock angle so the stock is straight with the barrel, not angled down.
Made in the USA.
All screw hardware included.
Allows easy install of Carolina, ACE, DPH, and Tromix bolt on stocks.
Installation requires the firearms LOWER TANG ONLY to be cut off flush with the receiver (Note AKRBMC requires removal of both Tangs).
SLING ADAPTER SOLD SEPERATELY (ACE-SLMT).
