Home > ALL PRODUCTS >

SAIGA 12 RELIABILITY KIT- Saiga 12, 20 & 410 Shotguns

Carolina Saiga 12 Low Brass Reliability kit gunfixer CSS


 
Price: $57.95

Stock Status:
IN STOCK AVAILABLE FOR PURCHASE


SKU#: CSS-RELIABILITY-KIT
Qty:

Description
 
Saiga 12's out of the box will normally shoot Buck Shot, Slugs and High Brass Bird Shot, but sometimes not all of them or Low Brass ammo.

This kit will help you run all 2 3/4" ammo from Slugs/Buck Shot to the low brass Walmart "100rd Value Pack" Remington and Federal birdshot.
We recommend you do not use a 1 oz birdshot load or Winchester "Universal" ammo if you are having cycling issues.

The Kit includes
1-CSS 6 Position adjustable Saiga Gas Knob.
1- CSS Peformance Recoil Spring designed for all 2 3/4" shells
1- CSS Performance G2 Puc is engineered to keep your gas system working in optimum performance

The combination of these 3 parts will help your gas system run ALL 2 3/4" shells unless you have improperly drilled gas ports.

Installation Instructions
1. Make sure firearm is unloaded.
2. Remove top cover from the firearm and pull out the recoil spring assembly.
3. Pull the front spring off the recoil assembly and replace with new front performance spring.
4. Completely unscrew the factory adjustment knob out of the gas block and push gas puc out through the front.

-Now is a great time to clean the gas block free of carbon build up and debris.
Also take a pic and make sure the gas ports are open inside the gas block.


5. Install the CSS G2 Puc with the flat side towards the back of the gun and the "Nose" towards the front.
6. Now install the new adjustment knob.

SETTING GUIDE FOR GAS PLUG
The lower the number, the less gas it allows into the system.
Setting #1: is normally used for all 3 inch shells and some heavy 2 3/4 inch.
Setting #2,#3: are normally used for all heavy 2 3/4 inch buck shot slugs.
Setting #4,#5: are normally used for 2 3/4 inch high brass bird shot hunting loads.
Setting #6: allows the most gas into the system and is normally used for the low brass shells.
These settings may vary depending on the ammo and the firearms.
All 3 parts are US made.

Works on all Saiga 12,20 and most 410 shotguns.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 34 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Saira 12 reliability kit March 27, 2024
Reviewer: Richard Steel from Durham, NC United States  
Well made. Doesn't require tool to adjust. Nice product

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Good to go! February 23, 2024
Reviewer: Dirk K. from Shepherd, MT United States  
Having been sick from the day I bought her home, the Saiga 12 is alive and well after installing the Reliability Kit from Carolina Shooters Supply.
She loved to jam, basically rendering her useless. With the addition of the kit, I believe it can be relied upon once and for all. We’ve put about 50 rounds of 2-3/4” 00 buck through her without one jam. Very happy 😊

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Made the Komrad work May 30, 2023
Reviewer: Ricky Deitch from Carlisle, PA United States  
My Komrad would jam practically every other round and was no fun to shoot. After the kit was installed, I shot a box of shells without a single problem. So far so good!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 RELIABILITY KIT- Saiga 12, KS 12 May 17, 2023
Reviewer: JMC from Mason, TX 76856  
Installed very easy.  I put in the kit a stainless recoil rod and did a bolt polish job. All issues solved. Tuned gas is the way to go. KS12 runs perfect. Money well spent.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Nice March 17, 2023
Reviewer: Anonymous Person from Smoot, WY United States  
Nice,alot higher quality than the gun it's for

Was this review helpful to you?

View All Customer Reviews