Home > ALL PRODUCTS >

CHARGING HANDLE-CSS KNURLED BOLT ON HANDLE

CSS Saiga VEPR CATAMOUNT AK47 Knurled charging handle


 
Alternative Views:


Price: $24.95

Stock Status:
OUT OF STOCK

SKU#: CSS-CHARGING-HANDLE
Qty:

Description
 
Bolts on to the existing charging handle to give you an enhanced (and smooth) oversized knob to operate your weapon easily.

This will work on all Vepr Rifles and Shotguns, Saiga Rifles and Shotguns, most AK 47's and Catamount Fury. Does not fit Lynx 12 and Cheetah/DDI 12.

Made in the USA of high quality black oxide steel.

Measures slightly longer than the other charging handles at 1 1/8"

Installation Instructions
1. Run the set screw completely through the handle, until it drops out into the center bore. That will ensure that screw is not stopping on any foreign debris left over from sand blasting.
2. Clean and degrease both the threads in the handle and the set screw with contact cleaner and allow to dry completely.
3. Apply red #262 Loctite to BOTH the set screw and the threads in the charging handle.
4. With the bolt carrier installed in the receiver, slide the charging handle over the OEM handle and start the set screw. The set screw should be facing or pointing forward. Slowly turn the set screw inward as you wiggle the handle in order to allow the set screw to find the "sweet spot" in the saddle of the OEM handle.
5. Using a large 4.5" long allen wrench, hoss that screw down until you think it's about to break. It won't.

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 10 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Fantastic April 12, 2021
Reviewer: Tro Jansky from Los Angeles  
This makes a huge difference in AK performance. Took it out to frontsight fit training and was absolutely needed for timed malfunction drills.

I recommend you put some JB weld inside, then red loctite it. I did this and I can ensure you it will NOT come off (which is a problem with these and other brands). Awesome addition to rifle.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Good add on April 9, 2021
Reviewer: Todd T from Durham, NC United States  
Easy to install.  Works with KS-12. Just be sure it can still engage the bolt hold open/safety lever notch.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Awesome April 8, 2021
Reviewer: Frank Burns from San Antonio, TX United States  
Awesome service order came fast

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Love it! March 30, 2021
Reviewer: Dao Xiong from Minneapolis , MN United States  
I love this extended Charging handle! I had to file down one of the rivets close to the ejector because it gets stuck on it & won’t open. But after that it fits & works great!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Love these, use em on all my AK's March 26, 2021
Reviewer: Jeremy Furtney from Alexandria, VA United States  
Like the title says, these are awesome and must have for any AK platform I have. Run one on my pistol, rifle, and shotgun AK's. Will order again as soon as I get another one.

Was this review helpful to you?

View All Customer Reviews