Home > AK47, AK74 & AKM Parts >

Mag Catch Hardware - Screw Type Rivet (much easier to install)
AK47 Mag Catch Hardware


 
Price: $9.95

Stock Status:
IN STOCK AVAILABLE FOR PURCHASE
SKU#: MAG-CATCH-HARDWARE
Qty:

Description
 
Mag Catch Hardware Kit for AK47, Saiga Rifle, VEPR Rifle.

Works with most AK47 Mag Catch products, including your factory Mag catch.

Spring sold separately.

Instructions:
1. Insert the Mag catch and catch spring into place and bend the spring into tension. Use the dowel pin to hold the spring in place as it is being compressed.
2. Line up the Mag catch so the holes are properly aligned with the holes in the tower and the catch spring is under full tension.
3. Insert the rivet through the catch tower and through the holes in the catch while pushing the dowel pin out the other side.
4. Once the rivet is completely installed, you can secure it in place. Install the lock washer and screw (thread locker recommended).

Contents:
1 Threaded Rivet
1 Lock Washer
1 Dowel Pin

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 9 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 making life easier February 17, 2023
Reviewer: louis h from metairie, LA United States  
screw type rivets are so much easier to install than the factory pins!!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Much much better now January 25, 2023
Reviewer: Kevin from CA United States  
The screw type rivet is much much better now.  The previous rivet was wearing out and getting all messed up.  And going loose every time I took to range.  Now, it's solid, and locked in.  Hasn't came undone.  I bought 2 or 3.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Cool item June 7, 2022
Reviewer: Adam  
Better than dealing with the rivet and peening it.  Hopefully it holds up as well as a rivet.  I added a drop of blue Loctite to the threads.  I think it’ll hold.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 March 18, 2022
Reviewer: Terry Nelson from Collierville, TN United States  
Excellent everything! Nothing more needs to be said about it.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 AK mag catch hardware - Screw Type Rivet March 4, 2022
Reviewer: Alan T from Lago Vista, TX United States  
Worked flawlessly! I chamfered the long rivet part on the threaded end with a Dremel tool to ease installation. This was the first time to do this and being the spastic type it took a while. Not the hardware's fault! Their YouTube video was a life saver!

Was this review helpful to you?

View All Customer Reviews