Home > ALL PRODUCTS >

JTE SHOTGUN PERFORMANCE GUIDE ROD - Includes GUIDEROD and SLEEVE (All Saiga Shotguns, VEPR 12, KS 12)

JT ENGINEERING SAIGA 12 PERFORMANCE GUIDE ROD


 
Alternative Views:


Price: $32.95

Stock Status:
IN STOCK AVAILABLE FOR PURCHASE


SKU#: JTE-GUIDEROD
Qty:

Description
 
Inconsistencies of the Saiga Guide Rod/Recoil Assembly are a problem due to how it flexes and can jam your gun and not allow it to cycle easily.
The factory recoil assembly can be the reason for (FTE) Failure to Eject problems.
JT Engineering Performance guide rod assembly will greatly smooth out the cycling of your Saiga Shotgun.
This includes 1 replacement rod constructed of 300 grade stainless and 1 slider made of Delrin.
It will retrofit into the existing recoil system by simply removing the the factory pin that holds the rod in place and inserting the new performance rod and replace the factory pin.
You can still use the existing dust cover and springs, or you can update to the improved CSS-Full-Power-Spring and CSS-Spring-1 for superior performance.
.
Works on all Saiga 12, 20, 410 and Vepr 12 shotguns and the Catamount Fury.

CATAMOUNT OWNERS: This product fits but requires some gunsmithing, the guiderod is a tight fit in the guiderod holder and the small dust cover piece needs to be reamed out to fit.

NOTE: We also sell the Recoil Assembly Holder separately or with the Guiderod as a kit.

Performance Guide Rod Install

recommended accessories for this product
Performance Recoil Spring for all Saiga/Vepr Shotguns JTE GUIDEROD HOLDER-REAR RECOIL SPRING GUIDE JTE SHOTGUN PERFORMANCE GUIDE ROD - SLEEVE ONLY (replacement sleeve for JTE Guiderod) MAGAZINE RELEASE TAB PIN -SAIGA 12/VEPR 12 (Also works for JTE-Guiderod)
Price: $5.95
Price: $44.95
Sale Price: $11.95
Price: $3.49
Carolina saiga reduced power recoil springs guide rod Performance JT ENGINEERING SAIGA 12 PERFORMANCE GUIDE ROD GUIDEROD HOLDER REAR RECOIL SPRING GUIDE JT ENGINEERING GUIDE ROD SLEEVE Saiga Vepr 12 Magazine Release Pin Tab
FULL POWER RECOIL SPRING FOR SAIGA/ VEPR12
Price: $5.95
Tromix Saiga 12 VEPR 12 Factory OEM Recoil Springs

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 13 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Nice addition February 23, 2024
Reviewer: Dirk K. from Shepherd, MT United States  
Nice little addition to the recoil system, makes cycling smoother 👍

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Fits Cheetah 12 but… September 25, 2023
Reviewer: JH from Cottonwood heights , UT United States  
You can run this on your Cheetah/DDI but you’ll likely need a small jewelers file and some patience to fit the retaining pin through the rod. As it’s not quite clearances enough. Took me ~20min of fitting and it was good to go.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Guide rod March 14, 2023
Reviewer: Mark TERELETSKY from Wadsworth, OH United States  
Parts arrived promptly and as described. Excellent service.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Get the combo with the holder February 18, 2023
Reviewer: Ty  
If you have a Lynx 12 I would recommend you get the combo that comes with the holder since it seems the pin that holds the rod to the other piece on the OEM part doesn't come out, I even took it to a gunsmith and they couldn't get the pin out. This may not be an issue on other models of but if you have a Lynx 12 save yourself the time and get the combo. Once I got everything working it is definitely a good upgrade compared to the original part

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 June 21, 2022
Reviewer: Wes Wallace from Dallas, TX United States  
excellent idea and product, good price

Was this review helpful to you?

View All Customer Reviews