Home > ALL PRODUCTS >

THREADING TOOL - 6.5MM PILOT for ANNULAR CUTTER
Saiga Vepr AK47 7MM 5/8 x 24 Inch Annular Pilot Cutter Kit #25547


 
Price: $13.99

Stock Status:
IN STOCK AVAILABLE FOR PURCHASE

SKU#: CNCW-ANNULAR-PILOT-6.5MM
Qty:

Description
 
This precision turned pilot is made of heat treated 4140 (chrome moly) and finished in black oxide.
It is designed to guide your Annular cutter into the right location to keep the barrel diameter concentric with the rifled barrel hole.

The cutter should be ran at slow RPMs (around 200), lubricated constantly, and a pilot used to keep it centered on the barrel properly.

ANNULAR Cutter(Shown in picture) is sold separately below.

Carolina Shooters Supply Inc. expressly denies any liability for results that may occur from the proper, or improper, use of this tool. If you are unsure about using it, please do not order.

recommended accessories for this product
THREADING DIE-14X1LH AK47, SAIGA 7.62, 5.45, 223 THREADING DIE STOCK HANDLE FOR 1 1/2" DIE THREAD CUTTING OIL
Price: $37.95
Price: $20.95
Price: $5.95
SAIGA AK47 7.62 THREADING DIES AND ALIGNMENT TOOL DIE STOCK HANDLE SAIGA BARREL THREADING AK47 AR15 VEPR SAIGA AK47 VEPR AR15 THREAD CUTTING OIL TAP MAGIC

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 5 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Great fit January 30, 2024
Reviewer: Gore from Louisiana  
Set your jam nut so it can spin freely and use plenty of lubricant. Zero marks in the rifling and it works great. Thank you

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great Threading Tools December 27, 2022
Reviewer: Thomas DAVIS from Snowflake, AZ United States  
I've probably done 10 barrels with these cutters available at Carolina Shooters.
Service and shipping is outstanding.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 March 8, 2022
Reviewer: Dennis Smith from Freeman, SD United States  
great product

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 November 5, 2021
Reviewer: Tom Flowers from Camarillo, CA United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 6.5 Pilot for Annular Cutter June 9, 2021
Reviewer: Bobby Rogers from Yellville, AR United States  
Found that some barrels are just a little different in size.  Put a single wrap of aluminum tape on tip of pilot and got the fit needed.

Was this review helpful to you?