Home > AK47 RIFLE PARTS >

Mag Catch Hardware
RAMS SUPERIOR Ak47 Saiga Vepr Rifle extended magazine release TACTICAL


 
Price: $6.95

Stock Status:
IN STOCK AVAILABLE FOR PURCHASE

SKU#: MAG-CATCH-HARDWARE
Qty:

Description
 
Mag Catch Hardware Kit for AK47, Saiga Rifle, VEPR Rifle.

Works with most AK47 Mag Catch products, including your factory Mag catch.

Spring sold separately.

Instructions:
1. Insert the Mag catch and catch spring into place and bend the spring into tension. Use the dowel pin to hold the spring in place as it is being compressed.
2. Line up the Mag catch so the holes are properly aligned with the holes in the tower and the catch spring is under full tension.
3. Insert the rivet through the catch tower and through the holes in the catch while pushing the dowel pin out the other side.
4. Once the rivet is completely installed, you can secure it in place. If using the threaded rivet, install the lock washer and screw (thread locker recommended). If using the standard rivet, deform the head of the rivet using the ball bearing and a press or hammer.