Home > ALL PRODUCTS >

CHEETAH DDI CHARGING HANDLE-CSS KNURLED BOLT ON HANDLE
CSS Cheetah 12 Extended Bolt on Charging Handle


 
Price: $23.95
Sale Price: $20.95
YOU SAVE $3.00!

Stock Status:
IN STOCK AVAILABLE FOR PURCHASE

SKU#: CSS-CHARGING-HANDLE-CHEETAH
Qty:

Description
 
NEW PRODUCT - NOW IN STOCK

Bolts on to the existing charging handle to give you an enhanced (and smooth) oversized knob to operate your weapon easily.

This will work on the DDI 12 and Cheetah 12 with the left hand charging handle.

Made in the USA of high quality black oxide steel.

Measures slightly longer than the other charging handles at 1 1/8"

Installation Instructions
1. Run the set screw completely through the handle, until it drops out into the center bore. That will ensure that screw is not stopping on any foreign debris left over from sand blasting.
2. Clean and degrease both the threads in the handle and the set screw with contact cleaner and allow to dry completely.
3. Apply red #262 Loctite to BOTH the set screw and the threads in the charging handle.
4. With the bolt carrier installed in the receiver, slide the charging handle over the OEM handle and start the set screw. The set screw should be facing or pointing forward. Slowly turn the set screw inward as you wiggle the handle in order to allow the set screw to find the "sweet spot" in the saddle of the OEM handle.
5. Using a large 4.5" long allen wrench, hoss that screw down until you think it's about to break. It won't.